Select Your Front Universal Joint - Click on the Picture (for questions, refer to the table below or click here):

Front U-Joint with trans yoke

Front U-Joint with trans yoke

Universal Joint table

Front U-joint with flange

Front U-joint with flange

Joint #

Inside/Outside Snap Rings

Cap Diameter

Breadth/Lock Up Yoke*

1310

1330

1350

1410

3R

Outside Snap Rings

Outside Snap Rings

Outside Snap Rings

Outside Snap Rings

Inside Snap Rings

1.063 in

1.063 in

1.188 in

1.188 in

1.125 in

3.219 in

3.622 in

3.622 in

4.187 in

2.556 in**

* If measuring on the yoke, for yokes that have outside snap ring grooves, measure from the inside of the snap ring groove on one ear to the inside of the snap ring groove on the other ear.

** Breadth/Lock Up Yoke measurement for the 3R joint is based on where the snap rings clip onto the joint.  If measuring on yoke, measure from the machined (flat) inside face of one ear to the machined inside face of the other ear.  This is where the snap rings will sit.  Note: If there are no snap ring grooves on the yoke, that means it takes inside snap rings.  (For photo explanation, click here.)

Feel free to email us with any questions: drivelineofpgh@gmail.com